Lumbar orthosis with additional tension straps
The protect.Lumbostyle is a lumbar support. The product is exclusively to be used for the orthotic fitting of the lower back and only on intact skin.
Controlled compression applied through the material and integral stabilising rods
Support of the trunk muscles
Relieves strain on the lumbar spine and easies pain
Before putting on the orthosis, please loosen the straps so that it can be put on without pulling. Wrap the orthosis around your abdomen and make sure it it positioned on the centre of your back.
Afterwards, place the left lock side on your stomach and then pull the right lock side far enough over the left side that it is possible to fasten.
Now, pull both tension bands forward at the same time. You can adjust the tightness to suit your own requirements and manage your pain levels.
First, fasten the left tension band and then the right.
The orthosis is on properly when the lower fastener edge is just above the groin.
Please take care that trained staff instruct you when putting on the support for the first time
Polyester, Polyamide, Elastane
Velcro fasteners should be closed for washing. Fabric softeners, grease, oil, lotions and ointments can affect the bandaging material. Soap residues can cause skin irritations and wearing of the material. Wash the product by hand, preferably using a medi clean detergent, or in delicate cycle at 30°C using a mild detergent without fabric conditioners.
Do not bleach.
Leave to dry naturally.
Do not iron.
Do not dry clean.
- For the treatment of painful conditions of the lumbar spine
- Lumbar sciatica (degenerative cause)
- Spondylosis without vertebral slipping
- Mild spondylosis / spondylolisthesis
- Disc protrusion
- Osteochondrosis, spondyloarthrosis
- Irritation of the ISG
- 01432 373500
- MON - FRI, 09.00 - 17.00