Woman man flying

protect.ROM/protect.ROM cool

Universal knee splint

  • Easy to use
  • Skin-friendly padding

Shop online  Medical specifications

Universal knee splint with flexion- / extension limitation and options for immobilisation

The medi ROM is a universal knee splint for mobilisation. The product is exclusively to be used for the orthotic fitting of the knee and only on unbroken skin.


Features

Product benefits

  • Easy to use patented Quick-Set hinge

  • Option to shorten the side bars due to integrated break lines

  • Skin friendly padding which can be adjusted according to patient needs by cutting


How does it work?/Mode of action

Collateral stabilisation of the knee joint
Post-operative immobilisation
Controlled mobilisation
Immobilisation in steps of 10° to 15°
Flexion: 0°, 10°, 20°, 30°, 45°, 60°, 75°, 90°, 105°, 120°
Extension: 0°, 10°, 20°, 30°
Immobilisation: 0°, 10°, 20°, 30°

Donning/fitting instructions

Open all the straps and take the joint braces out of the pads.
Wrap the calf and thigh pads tightly around the leg and fasten at the front.
First attach the lateral (outside) brace to the pad. Make sure that the brace joint is level with the patella and the midline of the knee.
Now attach the medial (inside) brace in the same way. Make sure that the two joints are at the same level.
First fasten the upper thigh strap, then the lower thigh strap. Now fasten the other straps, starting with the bottom one and working upwards.
To take the orthosis off just open the straps and pads and pull the orthosis of backwards.

Adjusting the flexion and extension stops
To adjust the range of movement first turn the opening in the plastic to expose one of the pins. Now press and hold the red button, at the same time turn to set the desired degree figure. Repeat this for the second pin.
Extension limitation: 0°, 10°, 20°, 30°
Flexion limitation: 0°, 10°, 20°, 30°, 45°, 60°, 75°, 90°, 105°, 120°
The medial (inside) and the lateral (outside) wedge settings must always be the same.

Fitting instructions
Open all the straps and take the joint braces out of the pads.
Wrap the calf and thigh pads tightly around the leg and fasten at the front.
First attach the lateral (outside) brace to the pad. Make sure that the brace joint is level with the patella and the midline of the knee.
Now attach the medial (inside) brace in the same way. Make sure that the two joints are at the same level.
First fasten the upper thigh strap, then the lower thigh strap. Now fasten the other straps, starting with the bottom one and working upwards.
To take the orthosis off just open the straps and pads and pull the orthosis of backwards.

Details

Standard colours


Material components

Aluminum, PU-foam, Cotton


Washing instructions

Velcro fasteners should be closed for washing. Soap residues, lotions and ointments can cause skin irritation and material wear.
Wash the paddings by hand, preferably using medi clean washing agent.
Do not bleach.
Leave to dry naturally.
Do not iron.
Do not dry clean.


Size


Size

protect.ROM 63 cm
protect.ROM short 57 cm
protect.ROM cool 63 cm
protect.ROM cool short 57 cm

Variants

protect.ROM: 63 cm long
protect.ROM: short 57 cm long
protect.ROM: cool 63 cm long
protect.ROM: cool short 57 cm long

Medical specifications

Indications

  • Post-operative immobilisation
  • For immobilisation after knee injuries and for later mobilisation
  • For secure stabilisation of injured or post-op collateral and / or cruciate ligaments

Contact us

Contact for retailers